The BB was set up here in Branford CT on my LAN and connected to a Ten-Tec Orion transceiver. We accessed it from the ARRL Lab in Newington.
The new audio transport software uses PortAudio and the Speex codec, along with grig and hamlib for rig control, we were able to demonstrate remote receiver operation.
There are many other existing remote control schemes, but our project has a number of features:
- Low-cost ($150 for the BB at Digikey)
- Low power (~5 W)
- Full-fledged Ubuntu Linux software environment
- Lots of I/O and CPU options for future expansion
- All open source (even the Beagleboard itself)
The fan would not be necessary, except that our board is overheating. It is going back to the Beagle Hospital for some TLC soon.
Update: It turned out the BB hardware was fine. I was running an Ubuntu kernel that was somehow configuring the board improperly. With a new kernel, the board runs very cool, with no fan needed.